WAGNER Paint Crew Owner's Manual download pdf (Page 11)

English

Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup and Long-

Term Storage steps.

Shutdown

1. Perform Pressure Relief Procedure, page 5. Unplug the

sprayer.

2. Turn the PRIME/SPRAY knob to PRIME. Switch the pump

OFF

(O).

3. Pour 1/2 cup water slowly on the top of the paint to prevent

the paint from drying. Wrap the spray gun assembly in a

damp cloth and place it in a plastic bag. Seal the bag shut.

Place the sprayer in a safe place out of the sun for short-

term storage.

1. Remove the gun from the plastic bag. Stir the water into

the paint.

2. Turn the PRIME/SPRAY knob to PRIME. Plug sprayer in.

Turn the switch to ON

(I).

3. Turn the PRIME/SPRAY knob to SPRAY. Test the

sprayer on a practice piece and begin spraying.

Startup

Short Term Storage (up to 16 hours)

Long-Term Storage

1. Remove the inlet filter (a).

You may need to use a

screwdriver to pry it loose.

2. Pour approximately two

ounces of light household

oil into the inlet valve

(b).

3. Remove hose from outlet

valve, place a rag over the

outlet valve, and turn the

switch ON (l). Let the unit

run for five seconds.

4. Turn the pump OFF (O)

5. Replace the inlet filter and

push the tab on the filter

(c).

6. Wipe entire unit, hose and

gun with a damp cloth to

remove accumulated paint.

Replace the spray hose.

(a)

(b)

(c)

Make sure you have already completed the Cleanup steps on pages 9-10.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

WAGNER Paint Crew Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Paint Sprayer WAGNER Paint Crew