WAGNER CONTROL SPRAY Owner's Manual download pdf (Page 7)

English

Assembly

Before you begin:

NEVER point the spray gun at

any part of the body.

To Assemble:

IMPORTANT: Make sure the power cord is

unplugged.

1. Insert the suction tube into the intake opening.

2. Align the suction tube -

a. If you are going to be spraying in a downward

direction, the angled end of the suction tube

should be pointing toward the front of the gun.

b. If you are going to be spraying in an upward

direction, the angled end of the suction tube

should be pointing toward the rear of the gun.

Note: Make sure the suction tube is inserted as far as

it will go to ensure a tight t.

IMPORTANT: Never tip the sprayer at more than a

45° angle. Material could get into the turbine and

damage the sprayer.

3. Carefully screw the cup back onto the nozzle

assembly. Tighten rmly.

4. Align the arrow on the nozzle with the “unlock”

symbol on the turbine.

5. Insert and twist the nozzle into the turbine toward the

“lock” symbol on the turbine.

The tab below the trigger will lock the two pieces into

place.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

No comments

WAGNER CONTROL SPRAY Owner's Manual Page 7