WAGNER Project 115 Owner's Manual download pdf (Page 12)

Project 115

Figure20-CleaningtheInletValve(Kitpartnumber

0418714)

Cleaning or servicing the inlet valve may be required if

the unit has priming problems. Priming problems may

be prevented by properly cleaning the sprayer and

following the long-term storage steps.

 1. Removethehopper.Loosenthelocknutbyturning

anticlockwise.

2. Remove the inlet sleeve (1) with a suitable tool (e.g. socket SW

11).

3. Inspect the threads on the inlet sleeve and the inlet sleeve

O-ring(2).Removeanyaccumulatedpaint.

 4. Toremovetheinletvalve,placetheassemblyaid(8)ona

socket (6) with a 5/8” insert (7). Insert the inlet valve tool into

theinletvalve(a).Removetheinletvalvescrewconnectionby

unscrewing anticlockwise from the housing.

 5. Retrievetheinletvalve(9)andtheinletvalveO-ring(10)from

the inlet valve housing. Clean or replace and lubricate the

O-ringwithalighthouseholdoil.

 6. SettheinletvalveO-ring(10)backintothehousing,andset

the inlet valve (9) on top of it.

7. Replace inlet tting (8) into the housing. Tighten with the

inlet valve tool (7) and ratchet (4, 5, 6).

 8. Replacetheseal(3).PlacetheinletsleeveO-ring(2)onto

theinletvalvetting(9),andreplacetheinletsleeve(1)by

twisting it clockwise.

9. Replace the hopper.

Figure21-CleaningtheOutletValve

Cleaning or replacing the outlet valve may be necessary if your

spray performance remains poor after having performed all the

steps contained in the Troubleshooting section of this manual.

1. Unscrew the outlet valve from the outlet valve housing using

an adjustable wrench.

 2. Inspecttheinsideoftheoutletvalvehousing(a).Cleanany

accumulated paint.

3. Replace with a new outlet valve. Tighten into outlet valve

housing with an adjustable wrench.

Parts Lists

Figure22-SprayGun/SprayHose

Item Part # Description Quantity

 1 0418717 Gunassembly(withoutnozzle) ....................1

2 0418705 Tip, XS ......................................................................1

2 0418708 Tip, L .........................................................................1

3 0418711 Filter, XS-S (red) ...................................................2

 3 0418712 Filter,M(yellow) ..................................................2

 4 0418718 Sprayhose,7.5m,red ........................................1

Part # Description

 0418705 Spraytip,XS .....................Water-soluble and solvent

based enamels and paints, oils

and release agents

 0418706 Spraytip,S .......................Syntheticresin-basedpaints,

PVC paints

 0418707 Spraytip,M ......................Enamel paints, undercoats,

primers, llers, indoor latex

paints and indoor emulsions

 0418708 Spraytip,L .......................Enamel paints, undercoats,

primers, llers, indoor latex

paints and indoor emulsions,

anti-corrosive paints

0418711 Filter, XS - S (red, 2 pack)

 0418712 Filter,M(yellow,2pack)

0418713 Filter, L - XXL+ (white, 2 pack)

0418714 Valve set (inlet and outlet valve)

All spare parts listed above are wear parts, and are not covered

by warranty!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

WAGNER Project 115 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Power tools WAGNER Project 115