WAGNER W180P Operations Instructions download pdf (Page 17)

W 180 P

Technical Data

Round spray nozzle: 0.8 mm Sound pressure

level:

86 dB(A)

Weight: 1.5 kg Sound pressure

output:

99 dB(A)

Oscillation level: 10.5 m/s²

Materials to be used:

Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes,

glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as well as

oils and other watery liquids.

The following spray substances are not suitable for use:

Dispersion and latex paints, materials containing strong abrasives, glazes with coarse

particles, strippers and caustic solutions, silicate paints. Use of these spray materials can

lead to increased wear or corrosion damage in the pump area, which are not covered by

the WAGNER-Guarantee.

Functional Description of the Spray Gun

The spray gun sucks in spray materials. The airless atomisation results when the spray material

is pumped at high pressure through the swirl system and the nozzle bore.

Preparing the Spray Material

The paints usually need to be diluted for use with the spray gun. You will nd guidelines

for sprayable dilutions in the following viscosity table (viscosity = consistency of the paint).

You can achieve the correct dilution by using the viscosity test cup.

Handling Table for Viscosity

Spray Material Viscosity: (Runout time in seconds)

Thinner-soluble varnishes/

primers 20-35 20-45

Water-soluble varnishes /

primers 20-50 20-60

Automobile spray paint 18-22 18-22

Wood preservatives,

disinfectants, plant protectants,

polishes, strippers, oils undiluted

Hammer eect enamel 25-35 30-45

Aluminium paints 20-30 20-30

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

No comments

WAGNER W180P Operations Instructions Page 17