Wagner Power Tex User Manual download pdf (Page 6)

English

. Turn the switch

FF (O)

nd unplug the power cord.

Make sure the hopper is empty of spraying material. Pour

any leftover material into a separate container. Remove

the hopper when empty.

O NOT attempt to

remove the hopper

from the sprayer if it

is full of material.

3. Remove nozzle from the sprayer. 4. The nozzle, sprayer and the hopper can now be hand-

cleaned using warm, soapy water and the cleaning brush

provided with the unit. Let faucet water run into the area

where the hopper connects to the sprayer. While the water

is running, activate the trigger to fully clean the nozzle area

DO NOT sumberge the turbine. The outside of the

turbine can be wiped clean with a damp cloth.

5. With the lubricant included with your sprayer, lubricate the

O-ring on the hopper (a) and lubricate the outer edge of

the plunger inside the rear of the sprayer housing

(b).

Pull and release the trigger a few times to distribute the

lubricant.

Cleanup

2. Unlock turbine from sprayer by turning the two halves in

pposite directions. The “unlock” symbol on the turbine

should come toward the guide on the sprayer. Set

turbine aside in a dry area.

After all components are clean, wipe down with a dry

cloth. Reassemble the sprayer/turbine. ON/OFF switch

should be facing upward. Clean turbine labels with a

damp cloth.

Some water may flow

out the rear of the

sprayer body.

(a)

(b)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Wagner Power Tex User Manual Page 6