WAGNER PaintMate User Manual download pdf (Page 3)

English

1. Filling the

main tube

Start

Before ﬁlling:

Your PaintMate™ can be used with two types

of container lids that are used to allow you to

pull material from the material container into the

PaintMate™.

The lid below is desiged for use with standard,

one-gallon, round material containers. This lid

comes standard with your PaintMate™.

Use the lid shown below if you are using

something other than a standard, one-gallon,

round material container. *Not included with

all models.

Attaching the container lid / ﬁll tube

Filling the main tube

1. Apply a thin layer of petroleum

jelly to the ll tube. This will help

the ll valve slide easily off the ll

tube.

1. Slide the small end of the ll tube

(a) through the hole in the container

lid you plan to use.

2. Press down and rmly hold the ll

valve onto the ll tube.

3. Pull the plunger to draw the

material into the main tube. When

the tube is full, you are ready to

begin using the PaintMate™.

2a. Standard containers - Attach the

container lid with ll tube securely

to the material container.

2b. All other containers - Thread the

container lid with ll tube onto the

material container.

(a)

1 2 3

1 2 3 4 5 6 7 8

No comments

WAGNER PaintMate User Manual Page 3