Wagner PaintREADY System User Manual download pdf (Page 11)

English

Troubleshooting

Any attempt to open the motor housing or repair any electrical parts within the

unit by anyone other than an authorized repair technician could cause serious

injury and will void the warranty.

This unit contains no servicable electrical parts. Do

not attempt to service yourself. Store indoors with

the cord wrapped around the turbine handle.

Problem A: Little or no material ow

Cause Solution

1. Nozzle clogged. Clean.

2. Suction tube clogged. Clean.

Material volume setting turned too low (-).

Increase volume setting (+).

4. Suction tube loose. Insert.

5. No pressure build up in container. Tighten container.

6. Air lter clogged. Change.

Problem B: Material leaking

Cause Solution

1. Nozzle loose. Tighten.

2. Nozzle worn. Replace.

3. Nozzle seal worn. Replace.

4. Material build-up on air cap and nozzle Clean.

Problem C: Spray pattern too thick, runs and sags

Cause Solution

1. Viscosity of material too high. Thin.

2. Material volume too large. Decrease volume setting (-).

3. Material volume setting too high (+). Decrease volume setting (-).

4. Pressure setting too low. Increase pressure setting (+).

5. Nozzle clogged. Clean.

6. Air lter clogged. Change.

7. Too little pressure build-up in container. Tighten container.

Problem D: Spray jet pulsates

Cause Solution

1. Material in container running out. Rell.

2. Air lter clogged. Change.

Problem E: Pattern runs or sags

Cause Solution

1. Applying too much material.

Adjust material ow or increase

movement of spray gun.

Problem F: Too much overspray

Cause Solution

1. Gun too far from spray object. Reduce distance.

2. Too much material applied. Decrease volume setting (-).

3. Pressure setting too high. Decrease pressure setting.

Problem G: Pattern is very light and splotchy

Cause Solution

1. Moving the spray gun too fast.

Adjust material ow or

decrease movement of spray

gun.

Have you tried the recommendations above and are still having

problems? In the United States, to speak to a customer service

representative, call our Technical Service at 1-800-328-8251 Monday

through Friday between 8:00 AM and 4:30 PM Central time.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Wagner PaintREADY System User Manual Page 11

Comments to this Manuals

Related products and manuals for Tools Wagner PaintREADY System