WAGNER WallPerfect W665 Operations Instructions Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 90
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
GB
25
WallPerfect W 665 I-Spray
12. Adjusting the Material Volume (Fig. 8)
Set the material volume by turning the regulator on the trigger guard of the spray gun
- turn to the left
lower material volume
+ turn to the right
higher material volume
i
An average ow setting provides the best result for most wall paints.
13. Spray Technique
Cover all surfaces not to be sprayed.
•
It is advisable to test the spray gun on cardboard or a similar surface to nd the
•
correct setting.
Important: Start at the edge of the area to be sprayed. Start the spray movement
rst of all, and then press the trigger. Avoid interruptions within the area
to be sprayed.
The spray movement should come from the arm, not just from the wrist. This ensures
that a uniform distance is maintained between the spray gun and the spray surface
during the spray operation. Select a distance of 20-30 cm, depending on the desired
spray jet width.
Fig. 9 a: CORRECT Even distance to the object.
Fig. 9 b: INCORRECT An uneven distance will result in uneven paint application.
Move the spray gun evenly cross-wise or up-and-down, depending on the spray
•
pattern setting.
An even movement of the spray gun results in an even surface quality.
•
If nozzle and air cap are soiled, clean both parts with water and solvent.
•
i
"Cross spray" when using paint with a poor covering capacity or if the
surface is highly absorbent (Fig. 10).
i
Interior wall paint in strong colour shades should be applied at least twice
(allow rst paint coat to dry rst). This will ensure good coverage.
14. Interruption of Work
Turn the machine o.
•
During longer breaks, vent the container by briey opening and then closing it again.
•
Clean nozzle openings after an interruption in operation.
•
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Comments to this Manuals

No comments