GB
13
W 560
Use the power tool, accessories, insert tools, etc. in accordance with these f)
instructions and in a fashion speci ed for this special tool type. Take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
Have your tool repaired only by quali ed specialist personnel and only with a)
original spare parts. This ensures that the tool safety is maintained.
If the supply cord is damaged, it must be replaced by the manufacturer or it’s b)
service agent or a similarly quali ed person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
You may only spray coating materials such as paints, varnishes, glazes, etc. with a ashpoint
•
of 21°C (32°C in UK) and higher without additional warning. (German classi cation of
coating material is hazard classes A II and A III, see material tin.)
The device may not be used in workplaces covered by the explosion-protection
•
regulations.
There must be no sources of ignition such as, for example, open res, smoke of lit
•
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
Do not spray any substances whose hazard potential is not known.
•
Before working on the spray gun remove the power plug from the socket.
•
Do not use the spray guns to spray ammable substances.
•
The spray guns are not to be cleaned with ammable solvents which have a ashpoint
•
under 21°C.
Caution against dangers that can arise from the sprayed substance and observe the
•
text and information on the containers or the speci cations given by the substance
manufacturer.
Recommendation: Wear a breathing mask and safety glasses when spraying.
CAUTION - DANGER OF INJURY!
Never point the spray gun at yourself, at other people or at animals.
When working with the W 560 indoors as well as outdoors ensure that no solvent vapors
•
are sucked in by the spray gun.
When working outdoors, be aware of the wind direction. Wind can carry the coating
•
substance across greater distances - thus causing damage. When working indoors, provide
for adequate ventilation.
Do not let children handle the device.
•
Never open the device yourself in order to carry out repairs in the electrical system!
•
The units may only be used with a functional valve.
•
If paints rises in the ventilating hose
(Fig. 1, item 11) do not operate the unit further! Dismantle and clean the ventilating
hose, valve and diaphragm and replace the diaphragm if necessary.
Do not lay the spray gun.
•
Comments to this Manuals