WAGNER 9190 Owner's Manual download pdf (Page 1)

English

Printed in the U. S. A.

MODELS 9140, 9140S, 9150, 9170, 9190 AND 9210

IGH PERFORMANCE AIRLESS SPRAYER

TABLE

OF CONTENTS:

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

COMPONENTS AND DESCRIPTION . . . . . . . . . . . . . . . . . . 4

SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PLUGGING IN THE SPRAYER. . . . . . . . . . . . . . . . . . . . . . . 6

PRESSURE RELIEF PROCEDURE . . . . . . . . . . . . . . . . . . . 6

PURGING AND PRIMING. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SPRAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SPRAYING TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 9

CLEANUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

FLUID SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

OWNER’

S MANUAL • READ THIS MANUAL FOR COMPLETE INSTRUCTIONS

0803 • Form No. 0512731G

SPECIFICATIONS:

Weight .............................. 25 lbs (9140S)

31 lbs (9140, 9150)

36 lbs (9170, 9190)

40 lbs (9210)

Capacity ...........................Up to .25 gallon (1 liter) per minute (9140,

9140S, 9150)

Up to .33 gallon (1.25 liter) per minute (9170)

Up to .42 gallon (1.6 liter) per minute (9190)

Up to .45 gallon (1.71 liter) per minute (9210)

Power source ...................1/2 Hp universal motor (9140, 9140S, 9150)

5/8 Hp permanent magnet DC motor (9170)

3/4 Hp permanent magnet DC motor (9190)

7/8 Hp permanent magnet DC motor (9210)

Power requirement...........15 amp minimum circuit on 115 VAC, 60

Hz current

Generator .........................15 amp A/C

Spraying pressure ............Up to 2800 PSI

Safety features .................Spray gun trigger lock and guard;

built-in tip safety guard; priming

knob for safe pressure release.

Capability..........................Sprays a variety of paints, oil

base, latex, primers, stains,

preservatives and other

nonabrasive materials.

Do not use materials with flash

points below 70°F (21°C).

1-800-880-0993

Wagner Technical Service

Need help? Call us first for answers fast.

Call Wagner Spray Tech toll-free if you have any

comments or problems with this product.

1770 Fernbrook Lane, Minneapolis, MN 55447

http://www.wagnerspraytech.com

Visit us on the world wide web!

U.S. Patent No. 6,435,846

This pump is available in two models: a

stand model and a cart model. The cart

model is shown in this manual. All

information given for the cart model

applies to the stand model except where

indicated.

This pump should not be used with textured materials,

block filler, or asphalt sealer.

1 2 3 4 5 6 ... 19 20

Summary of Contents

Page 1 - PERFORMANCE AIRLESS SPRAYER

EnglishPrinted in the U. S. A.MODELS 9140, 9140S, 9150, 9170, 9190 AND 9210HIGH PERFORMANCE AIRLESS SPRAYERTABLEOF CONTENTS:SAFETY . . . . . . . . . .

Page 2 - EAD ALL SAFETY

IMPORTANT CLEANINGNOTES!READ THESE NOTES ANDWARNINGS BEFORE YOUSTART TO CLEAN YOURSPRAYER!• When using latex paints, cleanyour sprayer and componentsu

Page 3

Page 4 - COMPONENTS AND DESCRIPTION

SHORT-TERM STORAGE (UP TO 16 HOURS)SHUTDOWN1. Lock the spray gun off.2. Turn the PRIME/SPRAY knob to PRIME.3. Switch the pump OFF, and unplug the spra

Page 5 - SETUP--ASSEMBLING THE SPRAYER

Page 6 - BEFORE YOU BEGIN

Page 7 - PURGING & PRIMING

Page 8 - SPRAYING TECHNIQUE

Page 9 - PRAYING TROUBLESHOOTING

Page 10 - 1-800-880-0993

Page 11 - LEANUP (CONTINUED)

Page 12 - STORAGE

HAZARD: INJECTION INJURYA high pressure paint stream produced bythis equipment can pierce the skin andunderlying tissues, leading to serious injuryan

Page 13 - MAINTENANCE ACCESSORIES

Page 14 - ASSEMBLY OF THE FLUID SECTION

HAZARD: GENERALCan cause severe injury or property damage.PREVENTION:• Read all instructions and safety precautions beforeoperating equipment.• Follo

Page 15 - TROUBLESHOOTING

SpraygunSpraytipSpray hosePail bracketLubricatingarea (on frontface plate)HosebracketHandleMotorhousingReturntubeSuctiontubeSuction set screenON/OFF s

Page 16 - SUCTION SET • DISPOSITIF

Page 17 - GX-08 (9190)

PLUGGING IN THE SPRAYER1. Check that the ON/OFFswitch is in the OFFposition.2. Plug the sprayer into aheavy duty groundedextension cord. Refer toImpo

Page 18 - GX-10 (9210)

Page 19 - FRANÇAIS

PRACTICEBe sure that the paint hose is free of kinks and clear ofobjects with sharp cutting edges.1. Switch the pump ON (l)and turn thePRIME/SPRAY kno

Page 20 - Français Español